- INKBOOK MODEL T62 HOW TO
- INKBOOK MODEL T62 INSTALL
- INKBOOK MODEL T62 UPDATE
- INKBOOK MODEL T62 DRIVER
INKBOOK MODEL T62 DRIVER
If the driver is not established, then the driver installation in Windows 8 - 10, use the instructions for the installation of unsigned drivers, for example thisor this. After installation is complete, point 3.1 drivers.Ĥ.3. In accordance with your operating system, select the desired subfolder. inf file! With automatic driver search in the folder, the driver will not install!
INKBOOK MODEL T62 UPDATE
Find the unknown device, you choose to update the driver, use Full manual mode driver update locations. with the only difference that in the Device Manager will show an unknown device, the screen refresh button can be released.Ĥ.2.
INKBOOK MODEL T62 INSTALL
If eKniga not turned into flashing mode, you need to install the driver in the Device Manager:Ĥ.1.
(Note: the screen refresh button is the one that is located on the upper left and is the button for turning the backlight on and off with a long press.)Ĥ.
INKBOOK MODEL T62 HOW TO
While she will not run, we press the button on it screen updates and not releasing it eKniga should decide in the program RKBatchTool (Note: the square should be green) How to determine key screen updatesIt will be released. If the indicator RKBatchTool not greenThen eKniga not flashing mode, you need to perform:ģ.1 A simple way: in RKBatchTool press Switch (Switch), EKnizhka should go in flashing mode and the indicator should RKBatchTool go green and then proceed to steps 5,6 or 7.ģ.2 Hardware method: Turn off eKnigu ( without disconnecting it from your computer!) EKniga being connected to a computer - she turns. Connect eKnigu via USB to your computer.ģ. Start the program for flashing RKBatchTool v1.8 In line FW Path (Path to the software): specify the path to the firmware file.Ģ. (Note: if you don’t, they will be lost - this method will completely format the entire memory!)ġ. This method is recommended to be used if the main one for some reason does not work - "scratching"īefore flashing it is recommended to save all the necessary files from the book’s memory to the computer. (note: but you can not do, at your discretion)Īfter the upgrade process, you have to reinstall Root and after installing Root you have to initialize the Xposed Framework (Xposed does not need to be reinstalled) Sometimes it makes sense to reset the settings from the book menu after that. All settings and installed programs after installing the firmware are saved. The firmware file will be deleted automatically.Ħ. If you agree, the book will be turned off and the next time it is turned on, the installation of the firmware will begin.ĥ.
Wait not long, it is possible to delay up to 5 minutes.Ĥ. After some time, you will be prompted to install the firmware. Disconnect the book from the PC and reboot it.ģ. (note: with this update method, update options that have file extensions imgor zipinterchangeable, in case you update from firmware from Boyue or Gmini)Ģ. If the file name is longer, then it must be renamed so that it matches the format. The file must have a name Update and expansion img or zip, depending on the upgrade option. Copy file with file extension img or zip to the root directory of the internal memory of a book or microSD card. If you replace the stock applications with third-party applications (for example, FBReader), then it is recommended to backup the application and its settings, since after the update process the stock version returns and you have to demolish it in a new way, then install and configure third-party. Before flashing it is recommended to save all the necessary files from the book’s memory to the computer (Note: although with this method of updating they should remain, but it is not enough that something can go wrong)
0 kommentar(er)
